重庆11选5

新乡市宏源振动设备有限公司电话
宏源提升机 > 产品展示 > 提升机系列 >

提升机系列

[field:title function='html2text(@me)'/]

D型斗式提升机

重庆11选5【CHANPINLEIBIE】TISHENGJIXILIE

重庆11选5【XINGNENGPINGCE】★★★★★

重庆11选5【CHANPINJIANJIE】DXINGDOUSHITISHENGJISHIJUYOUGUIGEDUOSHUSONGLIANGDA,TISHENGGAODUGAO,YUNXINGPINGWENKEKAO,SHOUMINGZHANGDENGXIANZHUYOUDIAN。...

D型斗式提升机概述

Product overview
    D型斗式提升机是具有规格多输送量大,提升高度高,运行平稳可靠,寿命长等显著优点。其主要技术性能及参数符合JB3926-85<<垂直斗式提升机>>(该标准等效,参照了国际标准和国外先进标准)。
   Type D bucket elevator is a specification, bue to more high hoisting height, stable operation and reliable, long life and other significant advantages.Its main technical performance and parameters accord with JB3926-85 < < vertical bucket elevator > > (the standard equivalent, with reference to the international standards and advanced foreign standards).
 
    D型斗式提升机具有以下特点:
    1、输送量大,相同斗宽的TD型与D型相比,输送量增大近一倍:
    2、牵引件采用高强度橡胶输送带具有较高的抗拉强度,使用寿命长。
    3、整机结构简单、安装方便、便于调整、维修和保养。
    4、牵引件为低合金高强度园环链,经适当的热处理后,具有很高的抗拉强度和耐磨性,使用寿命长。本提升机为离心式或混合方式卸料,掏取式装料,适用输送堆积密度不大于1.5t/m3的粉状、粒状、小块状的低磨琢性物料,物料的温度不得超过60度。本机备有四种料斗:Q型(浅斗)、H型(弧底斗)、zh型(中深斗)、sh型(深斗),分别输送各种物料,用户可以根据物料特性来选择适当得料斗。
    本提升机代号为D,即带式斗式提升机;产品规格以斗宽表示。
Type D bucket elevator machine has the following features:
1, High conveying capacity the same type bucket wide TD compared with type D, nearly doubling throughput:
2, traction USES high strength rubber conveyor belt has high tensile strength, long service life.
3, the machine has simple structure, easy installation, easy to adjust, repair and maintenance.
4, traction for high strength low alloy chain garden, after proper heat treatment, has the very high tensile strength and wear resistance, long service life.This elevator for the centrifugal discharging or mixed way, tao take charge, for conveying bulk density is not greater than 1.5 t/m3 powder, granular, small block of low grinding cut materials, the temperature of the material shall not exceed 60 degrees.This machine is equipped with four hopper: Q type (light pipe), H (arc bottom bucket), zh (in a deep bucket), sh (deep), conveying a variety of materials, respectively, a user can choose according to material features appropriate hopper.
This elevator codes for D, the belt bucket elevator;Product specifications to dou wide said.

D型斗式提升机特点

    D型斗式提升机为垂直式提升机,本提升机的特点为快速离心卸料,并采取橡胶输送带 为牵引机件,故不适于输送大块的,磨琢性高以及捏取阻力大的物料。被输送的材料温度不得超过80℃。斗式提升机具有输送量大,提升高度高,运行平稳可靠,寿命长显著优点,其主要性能及参数符合JB3926----85《垂直斗式提升机》(该标准等效参照了国际标准和国外先进标准),牵引圆环链符合MT36----80《矿用高强度圆环链》,本提升机适于输送粉状,粒状及小块状的无磨琢性及磨琢性小的物料,如:煤、水泥、石块、砂、粘土、矿石等,由于提升机的牵引机构是环行链条,因此允许输送温度较高的材料(物料温度不超过250 ℃)。一般输送高度最高可达40米.

Characteristic
   Type Dbucket elevator is vertical type elevator, the elevator to the characteristics is centrifugal discharge rapidly, and take the rubber conveyor belt for tractor parts, therefore, is not suitable for transporting large, grinding cut high and kneading resistance of the material.Materials to be delivered shall not exceed 80 ℃ temperature.Bucket, bue to ascend machine has high hoisting height, stable operation and reliable, long life advantages, the main performance and parameters meet JB3926-85 "vertical bucket elevator" (the standard equivalent with reference to the international standards and advanced foreign standards), traction circle chain accord with MT36-80 mine high strength round link chain, the hoisting machine suitable for conveying powder, granulated and small lump of cut grinding and grinding cut small materials, such as coal, cement, stone, sand, clay and ore, etc., as a result of the elevator traction institutions is a circular chain, thus allowing conveying high temperature materials (material temperature not over 250 ℃).General conveyor height of up to 40 meters.

斗式提升机图片

Photos

斗式提升机
斗式提升机
斗式提升机

D系列斗式提升机技术参数表

Parameters

XIANGMU

TISHENGJIXINGHAO

D160

D250

D350

D450

S制法

Q制法

S制法

Q制法

S制法

Q制法

S制法

Q制法

S制法

输送能力(m3/h)

8.0

3.1

21.6

11.8

42

25

69.5

 

料斗容量(l)

1.1

0.65

3.2

2.6

7.8

7.0

15

14.5

斗距(mm)

300

300

400

400

500

500

640

640

带料斗的胶带重量(Kg/m)

4.72

8.8

10.2

9.4

13.9

12.1

21.3

21.3

输送胶带:宽度(mm)

200

300

400

500

SHUSONGJIAODAI:CENGSHU

4

4

5

5

料斗运动速度(m/s)

1.0

1.25

1.25

1.25

传动滚筒轴转数(r/min)

47.5

47.5

47.5

37.5

物料的最大块度(mm)

25

35

45

55

XIANGMU

TISHENGJIXINGHAO

D160

D250

D350

D450

S制法

Q制法

S制法

Q制法

S制法

Q制法

S制法

Q制法

S制法

输送能力(m3/h)

8.0

3.1

21.6

11.8

42

25

69.5

 

料斗容量(l)

1.1

0.65

3.2

2.6

7.8

7.0

15

14.5

斗距(mm)

300

300

400

400

500

500

640

640

带料斗的胶带重量(Kg/m)

4.72

8.8

10.2

9.4

13.9

12.1

21.3

21.3

输送胶带:宽度(mm)

200

300

400

500

SHUSONGJIAODAI:CENGSHU

4

4

5

5

料斗运动速度(m/s)

1.0

1.25

1.25

1.25

传动滚筒轴转数(r/min)

47.5

47.5

47.5

37.5

物料的最大块度(mm)

25

35

45

55


      产品精良,欢迎来厂参观!
      Excellent products, welcome to visit our factory!
相关产品
产品类别
PRODUCT CATEGORIES
更多热销产品
联系方式
  • 新乡市宏源振动设备有限公司
  • 联系人:闫经理
  • 18803897720
  • 0373-2678112
  • 7091700@qq.com
  • 新乡市宏力大道西冀场工业园